Go-Stock - Ethical Product Solutions
Your cart : £ 0.00
Marine Algae Cleaner™ is more effective than Bleach and Sodium Hypochlorite
Marine Algae Cleaner™
Non Hazardous and a Non-Biocide. Adheres to Environment Agency and HSE guidelines.

Available in 100ml sample bottles for trial purposes, 1 Litre, 5 Litres, 20 Litres, 200 Litres, and an IBC 1000 Litres pallet.

Marine Algae Cleaner™ may be used neat or in dilutions of up to 1:20. It can be used in any aquatic environment without risk of environmental impact.
Conventional cleaning agents
Conventional cleaners leave embedded dirt, which builds up quickly meaning cleaning has to be completed regularly.

Biocides such as Sodium Hypochlorite and Benzalkonium Chloride which are commonly used to remove algae, both are classed as R50 and S61 under the safety data sheet hazards identification.

R50 very toxic to aquatic organisms
S61 avoid release to the environment. Refer to special instructions/safety data sheet

Using these products leads to a negative effect on the environment and leads to higher labour costs due to the extensive cleaning required.
Oleonix Marine Algae Cleaner - micriolysis
Oleonix Marine Algae Cleaner works at the surface/dirt interface. When dirt adheres to a surface, the surface tension created resists the efforts of standard cleaning agents to remove it.

The chemistry behind the range utilises micriolysis whereby the active agents break through the surface tension and penetrate to the core of dirt to break the bonds holding the dirt to whatever the surface is.

The released dirt is then easily removed by rinsing leaving surfaces so clean they resist the build- up of fresh dirt. Because more dirt is removed super-clean surfaces are achieved without the use of biocides
Dilute to 1:10
We recommend that you use Marine Algae Cleaner™ at a dilution rate of 1:10. You can up the dilution rate for any areas of heavy algae build up.

Marine Algae Cleaner™ can be used neat, and will still be non-hazardous to the environment.
For best results please apply the diluted Marine Algae Cleaner™ mix to the surface area, and the gently aggravate area with a brush, broom, or wiping cloth.

Then leave the liquid for at least one complete tide cycle, the sea will have rinsed the problem algae away.
If the area is above the tide line, please leave for 1 to 2 hours, before rinsing away with fresh or sea water.
Use with jet washers and powered cleaners
The Marine Algae Cleaner™ has proved very successful whilst being used in jet washers and powered cleaners.

Please dilute at a ratio of 1:10, and fill tanks, then use machines as usual.
Special Offers, Personal Protection, Hygiene & Janitorial, & Workplace Management
Go-Stock provides an end-of-line stock clearance for its customers. Please click on shop and select Special Offers if you would like to browse this section.

We provide Personal Protection products to help keep you safe at work. A wide range of Hygiene and Janitorial products, to help with cleanliness, and Workplace Management products, which cover many business sectors with specific products for your industry.

If you are searching for a specific product, and can not find the item you are looking for please contact us, and we will be able to source this for you.